Yamaha V-Max 1200

By the mid eighties, motorcycle design had come a long way. From the early, over-powered and ill handling Japanese superbikes, had evolved machines which took their cues from the racetrack and had tyers, suspension and steering to match. Suzuki’s GSX-R750 and Yamaha’s FZ750 typified the new breed. But there will always be those who are less concerned with all around performance than with sheer, brute power and thrill of violent standing start acceleration. The Yamaha V-Max was designed just for them.

When it was first introduced in 1985, the V-Max caused a sensation, as much for its styling as its potential performance. The high speed barred, low slung look was based on the American cruiser style bikes made for showing off an illegal sprints on impromptu drag strips on public roads. Real drag bikes had already evolved into long wheelbased, front heavy machines designed specifically for speed. Cruiser style puts the emphasis on looking fast, lots of noise and ability to leave long strips of burnt rubber off the start line are more important than actual times.

The V-Max is completely dominated by its engine. At the time its V-four layout was a high tech departure from the in line fours that powered most Japanese motorcycles. It featured a novel carburetor arrangement which meant each cylinder was fed by two carburetors, and then a gate moved to allow those same two carburetors to fill a different cylinder, thus eliminating the ‘dead’ time that usually occurs during a bike’s combustion cycle. And once on the move, the slightly lumpy power delivery, and the sheer amount of power it delivers – distract attention from the bike’s handling.


Honda GL1500 Gold Wing

When it comes to sheer size, superbikes don’t come any bigger than Honda’s GL1500 Gold Wing. The leviathan of the two-wheeled world is the ultimate in motorcycling comfort, designed solely to transport two people in as much style and luxury as is possible.

The Gold Wing has been around for two decades, during which time it has evolved from a fairly basic naked tourer into an everything-but-the-kitchen-sink machine for the discerning traveler. It began life as a 1000cc flat-four, grew to an 1100cc flat-four, a 1200cc flat-four, and finally into a 1500cc flat-six. Yes, six cylinders power this mighty beast, producing 98 bhp at 5200 rpm and a massive 110ft/ lb of torque at 4000 rpm. Despite weighing in at a hefty 800lbs dry, the ‘Wing is capable of top speed of 130 mph, although it takes its time getting there.

But top speed isn’t what the Gold Wing is about. Smooth, effortless power delivery, luggage carrying capacity, and supreme comfort, are what the Gold Wing is all about. And it is justly famous for achieving its purpose. The barn-door-like fairing is large enough to keep the wind and rain off the rider (although internal vents in the fairing allow you to direct cooling air at yourself when the weather gets hot). The saddle is a masterpiece of the furniture makers’ art, coddling the behinds of rider and pillion, and adding to the almost total absence of vibrations from the engine to give the smoothest ride known to motorcycling.

Yamaha XJR 1200

When Yamaha decided to enter the retro-bike market with a big, unfaired four-cylinder roadster, the perfect powerplant was already close to hand. The FJ1200 sports-tourer had been hugely popular for years due largely to its superbly tractable air cooled, 16-valve engine. This faith brute of a motor was detuned, its cylinder fin-tips were polished, and it was put on display at the heart of twin-shock musclebike called the XJR1200.
Yamaha lacked the four-stroke tradition of Kawasaki and Honda, whose Zephyr and CB1000 models the XJR, was created to challenge. But the new bike’s lines contained a hint of the 1978-model XS1100 four, and its all-black color scheme echoed that of later XS1100S Midnight Special. Maybe the lack of an illustrious predecessor was an advantage, because the clean, simply styled XJR was an undeniably good-looking machine.
The 1188cc motor was placed in a new round-tube steel frame which, like the square-section FJ frame, incorporated a bolt-on lower rail to allow engine removal. Forks were conventional 43mm units, at the same time as at the back the XJR had a twosome of remote-reservoir shocks from Ohlins, the Swedish suspension professional firm owned by Yamaha. A pair of board 17-inch wheels, the front holding big 320mm front discs with four-piston calipers, completed a purposeful profile.
Japanese riders were the first to discover this first-hand, as the XJR was introduced as a home-market bike in 1994, before being released elsewhere a year later. Most of those who rode it were impressed. Inevitably, the XJR1200 shared the limitations of every big naked bike, in that the exposed riding position soon made using the engine’s top-end performance tiring.

Nico Bakker QCS 1000

Yamaha were the first company to put an alternative front end into mass production on a motorcycle, but they were by no means the first to experiment with replacing the front forks in favor of a better design. One of the pioneers of alternative front ends is Dutch ‘Specials” builder Nico Bakker, a man with several decades of chassis and suspension building to his credit and an impressive consultancy list that includes BMW and laverda. And his QCS1000 (QCS stands for Quick Change System, both wheels can be changed in a very short space of time) is the latest incarnation of his own very effective design.

Traditional front forks are inherently flexible and can affect a motorcycle’s steering geometry as they compress in corners. A method of separating the steering from the front suspension is generally considered to be the way forward for motorcycle design, and as yet only Yamaha and BMW have put alternative front suspension systems into production. But Nico Bakker has a system which he has been using since 1998 which is both clever and effective.

The QCS is a hand built ‘special’ that uses a Yamaha FZR1000 engine for its motive power, around which is wrapped an aluminium alloy square-section chassis onto which are bolted single-sided swingarms front and back. The front suspension system works in a very similar way on that Yamaha GTS1000 – the steering is handled via a spar running from the hub of the front wheel to the steering crown, while the suspension is actuated by the single-side swingarm that bolts onto the front of the chassis. The benefits of this system can best be realized by a high-performance sportsbike, which makes Yamaha’s decision to fit it to a modest-performance sports-tourer surprising.

But the performance of the QCS is anything but modest. The derestricted FZR1000 engine oozes power and torque. The five-valves-per-cylinder inline four makes 145 bhp in the QCS and is capable of whisking it u to 165 mph in the QCS and is very short order. The rear suspension is also a single-sided swingarm affair, but without the necessity for steering the system, is used primarily for fast wheel changes (Honda developed this system for their endurance racing bikes, and it has subsequently been used on road-going machines by Honda and Aprilia)

On the road the QCS delivers exactly what it promises. There is no front end drive when hard on the brakes, and the bike is rock-steady mid-turn. It exhibits none of the drawbacks of traditional front forks and, unlike the GTS1000, the steering response is both fast and positive. A massive front disc brake gripped by a six piston caliper helps stop this 160 mph beast, and a massive 180/55 section rear tyre helps the QCS tenaciously in the corners. The svelte bodywork and ‘unusual’ suspension system give the QCS a look all of its own – the swoopy styling and bright red paint tells the world that this is one serious, and very powerful, motorbike.